King gates JET XL 230 Installation And Use Instructions And Warnings page 20

03. Manually move the gate leaf until the mechanical stop screw is
visible; loosen the screw (fig. 10);
04. Manually move the gate leaf to the desired open position.
05. Move the mechanical stop against the pin and tighten the screw
(fig. 11);
6
06. Now repeat the procedure by manually moving the gate leaf to
the maximum closed position, to adjust the closing limit switch (fig.
12);
Fig. 10
07. Replace the cover and tighten the two screws.
08. Lock the gearmotor..
Fig. 11
1
Fig. 12