Advertisement
Advertisement
Table of Contents
Related Manuals for King gates Dynamos 500
Summary of Contents for King gates Dynamos 500
- Page 1 Dynamos INSTRUCTION MANUAL...
- Page 2 Dynamos 24V= 90 Dynamos 230V= 94...
- Page 5 AVAILABLE VERSIONS Code Description Dynamos 500 Irreversible 230 Vac, incorporate control unit and radio receiver 433.92 Mhz, max 500 kg Dynamos 1000 Irreversible 230 Vac, incorporate control unit and radio receiver 433.92 Mhz, max 1000 kg Dynamos 24/400 Irreversible 24 Vdc, incorporate control unit and radio receiver 433.92 MHz, max 400kg...
- Page 6 Use personal safety devices and locate warning signs on the motorized gate. Unfulfilment of the below listed direction will release the King gates srl, from any responsibility for damage caused to people or things.
-
Page 7: Technical Data
-Rember to earth the power line. -Ascertain the absence of power in pre-existent gates and remove any manual lock. -Before the first functioning ascertain that the automation has been carried out according to the law in force. TECHNICAL DATA Code D 500 D 1000 D 24/400... - Page 8 INSTALLATION Read the instructions with care before installing the product. The producer disclains all responsibility for any damage or bad functioning caused by non-osservance of the instructions or bad connection that may result in poor safety and functioning of the gear-motor. PLATE FIXING Tighten the two foundation tie-beans on the plate with the two M10 nuts (pic.2) In accordance with the size, fix the plate on a concrete base of adeguate dimension,...
- Page 9 STOPPING STIRRUPS INSTALLING Move the door to open/close position. Fix the left and right stop-stirrups on the rack with the screws provided, considering that when stopping, the gate slides for 2/3 cm more after the limit switch intervenes (pic.9). Set the motor authomatic functioning (pic.11). MANUAL CONTROL RELEASE ATTENTION: before operating the manual release disconnect the power.