Table of Contents
Advertisement
Overview & General Specifications
General Specifications
Specifications
Approvals
AC Power per Supply
Power Consumption (max.)
Power Consumption (typical)
Thermal Dissipation (max.)
Thermal Dissipation (typical)
Humidity
Operational Temperature (continuous)
Operational Temperature (peak)
Dimensions
Weight
For individual board information and specifications, see the specific board chapter in this manual.
Note: Features and specifications described in this document are subject to change without
notice.
Configuration & Control
The configuration file contains routing and control information for an AMX AutoPatch Routing System.
Each system is programmed (configured) at the factory according to customer specifications.
Configuration Information
The custom configuration file is provided on the AMX AutoPatch CD that is shipped with each system.
The software provided on the CD can be used to further customize the configuration file (see page 67).
Unless you need to modify your system, you will not need to use any of the configuration software that
is included on the CD. Always make a copy of the configuration file before modifying it.
Configuration file modifications include creating local presets, customizing input and output channel
names for control display (e.g., in APWeb's control interface), as well as adding or managing hardware.
Configuration file modifications are made with XNConnect, which graphically displays the AMX
AutoPatch system and its control configuration. Other configuration software for specific hardware or
for adjusting signal quality is also available on the AMX AutoPatch CD. For details, see the individual
program's Help file.
12
Parameter
Pending
100 to 240 VAC single phase (50 to 60 Hz)
2000 Watts
850 Watts, fully loaded enclosure
6824 BTU/hr.
2900 BTU/hr., fully loaded enclosure
0 to 90% non-condensing
32° to 95° F (0° to 35° C)
32° to 110° F (0° to 43° C), up to 48 hours
21.1 in. (53.6 cm) depth
19 in. (48.26 cm) width with mounting ears
17.6 in. (44.7 cm) width without mounting ears
28 in. (71.1 cm) height (16 RU)
Approximately 160 lb. (72.6 kg) per fully loaded enclosure
Value
Epica DG Instruction Manual
Advertisement
Table of Contents
