Forwarding Calls; Use Variable Call Forwarding - Unify OpenScape CP700 User Manual

118
-
Variable: All calls Not set
Variable: External calls Not set
Variable: Internal calls Not set
.
©
3335
Q

Forwarding calls

Use variable call forwarding

You can immediately forward internal and/or external calls to your lines to differ-
ent internal or external telephones (destinations) (external destinations are also
possible if the system is configured accordingly).
If call forwarding is activated, a special dial tone sounds when the handset
is lifted.
If DTMF dial-in (ask relevant Administrator ) is active, you can also divert
calls there. Destinations: Fax = 870, Direct inward dialing = 871, Fax-Di-
rect inward dialing = 872.
If you are the end caller of a forwarded call, you can see the call number
or the name of the forwarding party in the Notification area of the display
(first line) and those of the caller below it.
If your telephone is connected to a system network, pay attention to any
specific features
Setting up call forwarding via the forwarding menu
Prerequisite: The Presence menu is not available
\
Open the Forwarding menu.
In the menu, you immediately have an overview of call forwarding current-
ly set-up. This menu is also available via the user settings.
_ Confirm.
¦
or
Confirm.
_
¦
or
_ Confirm.
¦
j
Enter the destination phone number.
Confirm your input with the Softkey.
_
page 210!

page 89
