Default Configuration - Analog Devices ADSP-BF561 EZ-KIT Lite System Manual

If any item is missing, contact the vendor where you purchased your
EZ-KIT Lite or contact Analog Devices, Inc.

Default Configuration

The EZ-KIT Lite evaluation system contains ESD (electrostatic
discharge) sensitive devices. Electrostatic charges readily accumu-
late on the human body and equipment and can discharge without
detection. Permanent damage may occur on devices subjected to
high-energy discharges. Proper ESD precautions are recommended
to avoid performance degradation or loss of functionality. Store
unused EZ-KIT Lite boards in the protective shipping package.
The ADSP-BF561 EZ-KIT Lite board is designed to run outside your per-
sonal computer as a standalone unit. You do not have to open your
computer case.
When removing the EZ-KIT Lite board from the package, handle the
board carefully to avoid the discharge of static electricity, which may
damage some components.
DIP switch, connector locations, and LEDs used in installation. Confirm
that your board is set up in the default configuration before using the
board.
ADSP-BF561 EZ-KIT Lite Evaluation System Manual
Using the ADSP-BF561 EZ-KIT Lite
Figure 1-1 shows the default jumper settings,
1-3