Board Design Database - Analog Devices ADSP-BF561 EZ-KIT Lite System Manual

3. If using the ADV7183A decoder:
• Enable device by driving programmable flag output
0
• Select
Switch (SW5)" on page
4. Program internal registers of the video device in use. Both video
encoder and decoder use a 2-wire serial interface to access internal
registers. The
( ), and
SCL
5. Program the ADSP-BF561 processor's PPI interfaces (configura-
tion registers, DMA, and so on).

Example programs are included in the EZ-KIT Lite installation
directory to demonstrate the capabilities of the video interface.

Board Design Database

A file containing all of the electronic information required for the
.zip
design, layout, fabrication and assembly of the product is available for
download from the Analog Devices board design database at:
http://www.analog.com/board-design-database
ADSP-BF561 EZ-KIT Lite Evaluation System Manual
.
clock; for details, refer to
PPI0
programmable flag functions as a serial clock
PF0
functions as a serial data (
PF1
Using the ADSP-BF561 EZ-KIT Lite
"PPI Clock Select
2-13.
).
SDAT
.
to
PF2
1-17