Analog Devices ADSP-BF561 EZ-KIT Lite System Manual page 12

Product Overview
• LEDs
• 20 LEDs: 1 power (green), 1 board reset (red), 1 USB (red),
16 general-purpose (amber), and 1 USB monitor (amber)
• Push buttons
• 5 push buttons with debounce logic: 1 reset,
4 programmable flags
• Expansion interface
•
PPI0
programmable flags,
• Other features
• JTAG ICE 14-pin header
The EZ-KIT Lite board holds 8 MB of flash memory, which can be used
to store user-specific boot code, allowing the board to run as a stand-alone
unit. The board also holds 512-Mb SDRAM, which can be used at run-
time. For more information see
interfaces with the AD1836A audio codec, facilitating creation of
SPORT0
audio signal processing applications.
connector to allow communication with other serial devices. For informa-
tion about
SPORT0
The parallel peripheral interfaces (PPIs) of the processor connect to both a
video encoder and video decoder, facilitating creation of video signal pro-
cessing applications. For information on how the board utilizes the
processor's PPIs, see
The UART of the processor connects to an RS-232 line driver and a DB9
male connector, allowing you to interface with a PC or other serial device.
For information about the UART, see
xii
, , SPI, EBIU,
PPI1
SPORT0
"Memory Map" on page
, see "SPORT Audio Interface" on page
"PPI Interfaces" on page
ADSP-BF561 EZ-KIT Lite Evaluation System Manual
, UART,
Timers11-0
,
SPORT1
also attaches to an off-board
SPORT0
2-5.
"UART Port" on page
1-11.
2-3.
2-8.