Default Configuration - Analog Devices EVAL-AD2437B1NZ Evaluation Board Manual

Default Configuration

• XLR Cable
Contact the vendor where you purchased your EVAL-AD2437B1NZ evaluation board or contact Analog Devices,
Inc. if any item is missing.
Default Configuration
The Default Hardware Setup figure shows the default settings for jumpers and switches and the location of the
jumpers, switches, connectors, and LEDs. Confirm that your board is in the default configuration before using the
board.
P17
P4
P16
P7
P6
P9
JP1
DS1
DS2
DS10
P1
DS4
Figure 2-1: Default Hardware Setup
2–2
P18
JP2 JP3
P19
DS11
DS6
P5
DS5
P10
P2
S1
S2
DS3
P13
DS8 DS12
DS9
EVAL-AD2437B1NZ Manual