Bedebugstate - Debug State Control - ABB BullsEye Applications Manual

6 RAPID reference

6.2.2 BEDebugState - Debug state control

6.2.2 BEDebugState - Debug state control
Usage
BEDebugState is used to control the debug log detail level. Normally only limited
information in stored in the BullsEye log files. With this instruction, more detailed
information is recorded to help advanced users determine the cause of an error.
This instruction is hidden from the IPL.
Basic examples
Turns on the debugging flag.
Turns off the debugging flag.
Arguments
[\On]
Data type: switch
Used to turn on debugging.
[\Off]
Data type: switch
Used to turn off debugging.
Program execution
The instruction should be placed before BullsEye instructions. The log files affected
are called BE_Oper.log and BE_Init.log and are found in the folder TEMP.
Syntax
Related information
BECheckTcp
BEUpdateTcp
BESetupToolJ
68
BEDebugState\On;
BEDebugState\Off;
BEDebugState [\On] [\Off]
BEDebugState
[ '\' On ] < switch >
[ '|' Off ] < switch > ';'
Described in:
BECheckTcp - BullsEye check TCP on page 65
BEUpdateTcp - BullsEye update TCP on page 79
BESetupToolJ - BullsEye setup tool joint move on page 72
© Copyright 2004-2018 ABB. All rights reserved.
Application manual - BullsEye
3HAC050989-001 Revision: C