Return Water Flow Control - ABB DressPack IRB 6620 Product Manual

2 Installation

2.6.2 Return water flow control

2.6.2 Return water flow control
Overview
The mechanical flow control valve is pre-set at delivery at 8 liter/min (maximum
flow).
Settings
The procedure below details how to set the mechanical flow control valve.
1
2
3
126
Action
Open the solenoid valve on the water inlet.
Water flow is indicated on the scale of the Flow
control valve.
Adjust water flow by using the red adjusting knob
on the scale of the Flow control valve to the required
set flow.
© Copyright 2006-2018 ABB. All rights reserved.
Note
The red adjusting knob is placed
on the back of the Water and Air
unit.
Product manual - DressPack/SpotPack IRB 6620
3HAC027309-001 Revision: L