Table of Contents
Advertisement
2 Installation
2.1.2 Connections on the control module
2.1.2 Connections on the control module
Connect drive modules to the control module
At delivery, both the Ethernet cable and the safety signal cable are connected to
the drive module. They are also attached to a shield plate that fits in the slot of the
control module.
Remove the cover from an empty slot and fit the shield plate of the communication
cables in its place. Connect the Ethernet cable according to
on page 21
page
DSQC1000
xx1400000408
A
B
C
D
Continues on next page
20
and safety signal cable according to
23.
A
A
B
B
C
C
MultiMove Ethernet switch DSQC1007 (3HAC045976-001)
Main computer DSQC1000
Panel board DSQC 643
Slots for inserting communication cables into the control cabinet
© Copyright 2004-2018 ABB. All rights reserved.
Ethernet connections
Safety signal connections on
D D
Application manual - MultiMove
3HAC050961-001 Revision: E
Advertisement
Table of Contents
