Be_Scan - Scan Data - ABB BullsEye Applications Manual

6 RAPID reference

6.1.2 be_scan - Scan data

6.1.2 be_scan - Scan data
Usage
be_scan describes how BullsEye® should behave during the scanning process.
Components
NumOfScans
Data type: num
The number of redundant scans is defined here. Redundant scanning will give
better repeatability and accuracy.
BodyScanMargin
Data type: num
This distance (mm) plus half the MaxBodyDia from be_tooldesign gives the
start offset of the body scan.
Units: mm
xx1400001229
WireScanMargin
Data type: num
This distance (mm) plus half the WireDia from be_tooldesign gives the start
offset of the wire scan.
Continues on next page
58
© Copyright 2004-2018 ABB. All rights reserved.
Application manual - BullsEye
3HAC050989-001 Revision: C