Advanced Administration; About Ir Learning; Components Needed For Ir Learning; To Perform Ir Learning - AMX TVM-1600 User Manual

Advanced Administration

About IR Learning

The Endeleo Managed TV solution supports the learning of Infrared (IR) control protocols for centrally
located devices, i.e. devices connected to the rear of the TVM-Hub.
These devices can be DVD players, VCRs or Cable / Satellite Receivers. For example it is possible from
an end point to issue a remote IR request and select the "Play" function on a remotely located DVD
player.
Important Notes about IR Learning:

Components Needed For IR Learning

FIG. 28 Components needed for IR Learning

To Perform IR Learning

The two stages for learning IR Protocols are:
1. Train the TVM-1600 to understand the timing sequences of the remote control protocol and
2. Learn the IR code for specific functions on that remote control.

Learning the Device's IR protocol

1. A console session needs to be opened on the Managed TV hub. The configuration settings for the
Terminal session are:
2. At the command prompt enter the following;
TVM1600 16 Port Managed TV Distribution Hub - User Guide
The IR learning is carried out at the TVM-1600;
Care should be taken to shield the hub from other IR devices during the learning process;
All Centrally located devices requiring control must be connected to the hub via the IR blaster
port on the rear of the hub and
The part number for the 4-Way IR Splitter necessary for TVM Central Device Control is
TVM-IR04.
• Baud Rate: 9600 bps
• Data Bits: 8
• Parity: None
• Stop Bits: 1
• Flow Control: None
r init hub "XXXX"
Advanced Administration
27