Get Hub Identification & System Information; Get Port Details; Command Line Range Commands; Set Port - AMX TVM-1600 User Manual

Advanced Administration
Get Hub Identification & System Information
Displays version information for the hub controller.

Get Port Details

Displays port details and details of the device connected (resolution, polarity)

Command Line Range Commands

Sets the Channel range for the hub. This property value may be used in subsequent action commands. A
range may be specified using the min and max values, if max is equal to the min then a single value will
be used.

Set Port

Sets the Port range for the hub. This property value may be used in subsequent action commands. A
range may be specified using the min and max values, if max is equal to the min then a single value will
be used.

Set TV system

Sets the system (for example, PAL I or NTSC) which the selected port (or range of ports specified in the
Port property) will use. In most cases a single system will be used for all ports on a hub, and if the port
parameter is zero, all ports will be set with the same system.
TV System Value TV System
1
2
3
4
5
6
7

Set Channel Frequency

Sets the frequency for a channel on a port (or range of ports). The frequency is specified in MHz as a
decimal number e.g 643.25
40
?
? [port no]
s [min channel] [max channel]
p [min port] [max port]
t [system value] [port]
PAL I
PAL B/G
PAL D/K
SECAM
NTSC M
NTSC N
SECAM L'
f [channel] [frequency] [port]
TVM1600 16 Port Managed TV Distribution Hub - User Guide