Snom190; Snom200; Snom220; Snom320 - Epygi Quadro2x Configuration Instructions

Epygi Technologies
5.3 .1

Snom190

To complete the automatic configuration on snom190, reset the phone to factory default settings:
1. Press the F key to invoke the menu.
2. Use the right or left navigation keys on the keypad of the phone to scroll to Configuration.
3. Press the Reset soft key. The phone will require the administrator password (the default is
0000).
4. Enter the password and press OK. If the entered password is correct, the
reboot.
5. P ress O K to restart the
6. After the phone restarts, select the language of the phone and press OK.
5.3 .2

Snom200

To complete the a utomatic configuration on snom200, reset the phone to factory default settings:
1. Press the F key to invoke the menu.
2. Use the right or left arrow keys on the keypad of the phone to scroll to Configuration.
3. Press the Reset soft key. The phone will require the administrator password (the default is
0000).
4. Enter the password and press OK. If the entered password is correct, the
reboot.
5. P ress O K to restart the
6. After the phone restarts, select the language of the phone and press OK.
5.3 .3

Snom220

To c omplete the automatic configuration on snom220, reset the phone to factory default settings:
1. Press the MENU key to invoke the menu.
2. Use the right (F1) or left (F2) arrow keys on the keypad of
submenu and press ENTER (or F4).
3. Scroll to Reset Values by using the F1 or F2 soft keys and press ENTER. The phone will
require the administrator passw
4. Enter the password and press OK. If the entered password is correct, the phone will ask for a
reboot.
5. Press OK to restart the phone.
5.3 .4

Snom320

To complete the a utomatic configuration on snom320, reset the phone to factory default settings:
1. Press the Settings key on the keypad of the phone.
2. Press the Reset s
0000).
3. Enter the password and press OK (the
ask for a reboot.
4. Press OK (the
5. After the phone restarts, select the language of the phone and press OK.
phone.
phone.
ord (the default is 0000).
oft key. The phone will ask for the administrator password (the default is
key) to reboot the phone.
Auto Configuration of Quadro LAN IP Phones
the phone to scroll to the Settings
key). If the entered password is correct, the phone will
PAGE 8
phone will ask for a
phone will ask for a
29-Dec-05