Software Type_Id For Modules - Honeywell NOTIFIER AM-8200 Programming Manual

Input modules for CONTACTS
TABLE‐1
Input Module 3 Treshold EN54
MON3
Input Module 2 Treshold (NOT EN 54 compliant)
MON
Same as MON, but label "MANUAL Call Point".
PULL
Input Module Non Alarm
NONA
Input Module same as NONA, signal both status variation
STAT
Input Module for N.C. contacts
NCMN
Input Module Tamper.
MTRB
Input Module for remote ACK (pulse).
MACK
Input Module for remote SILENCE (pulse).
MTAC
Input Module for remote RESET (pulse).
MRES
Input Module conventional zone
SCON
Output Modules Supervised Output Advanced and VDS
TABLE ‐2
Output Module supervised
CON
Output Module supervised VDS
CONV
Output Module – Relay output contacts free voltage.
FORC
Output Module FORC interrupts momentarily the power supply (used for reset
PWRC
conventional detectors)
Output Module FORC activated at each alarm / fault.
GPND
Output Module FORC activated at each alarm.
APND
Output Module FORC activated at each alarm.
GAC
Output Module CON activated at each alarm.
GAS
Same as GAS but with controlled VDS output
GASV
Output Module FORC activated at each fault.
TPND
Output Module FORC activated at each fault.
GTC
Output Module CON activated at each fault.
GTS
Same as GTS but with controlled VDS output
GTSV
Output Module FORC activated at each fault.
TRS
Output Module activated in case of exclusion of point or zone.
ZDIS
Output Module (not supervised) activated for Power Failure.
MAINF
Come MANIF, supervised
MAINFC
Come MANIF, ma con uscita supervisionata (EOL RES complies VdS)
MAINFV
Output Module con contatti liberi da potenziale, comandabile solo da supervisione
REM
Same as REM supervised
REMC
Same as REM, supervised (EOL RES complies VdS)
REMV
SND Output Module which follows the status of the panel Sounder Output
Output Module FORC activated when the associated zone is in fault
ZFLT
come ZFLT supervised
ZFLTC
come ZFLT supervised VdS
ZFLTV
Output Modules Supervised Output Advanced and NOT VDS
TABLE ‐2B
Output Module supervised Output
CON
Output Module relay with potential‐free contacts.
FORC
Output Module FORC interrupts momentarily the power supply
PWRC
Output Module FORC activated at every alarm / fault.
GPND
Output Module FORC activated at every alarm.
APND
Output Module FORC activated at every alarm.
GAC
Output Module CON activated at every alarm.
GAS
Output Module FORC activated at every fault..
TPND
Output Module FORC activated at every fault..
GTC
Output Module CON activated at every fault..
GTS
Output Module FORC activated at every fault..
TRS
Output Module activated in case of exclusion of point or zone.
ZDIS
PAGE - 70
NOTIFIER ITALIA
Appendix B : Software Type_ID for MODULES
Programming Manual
Doc. M-162.1-AM8200-ENG Rev A2
CBE Y/N
Y
Y
Y
Y
Y
Y
N
N
N
N
Y
CBE Y/N
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
CBE Y/N
Y
Y
N
N
N
N
N
N
N
N
N
N
AM_8200
AM8200_manu-prog-ENG