Module Status - Honeywell NOTIFIER AM-8200 Programming Manual

M o d u l e S t a t u s
M o d u l e S t a t u s
The display shows by default the first device of the first line. To select another device use the function keys
Esempio di visualizzazione dispositivi FAAST
SW Type programmed for output
of the device
Name =
Programmable Text max. 32 char
Status of the module
Displays the Fan speed
Displays the Air flow
Displays the Smoke level
PAGE - 54
NOTIFIER ITALIA
Modify the Output Status
Programming Manual
Doc. M-162.1-AM8200-ENG Rev A2
Module Status depends on Module Type
(Input or Output)
Modify the Output Status of a Control Module
After selecting the "On/Off" field using the arrow
keys  , user can switch the control module
output pressing the OK
This action is indicated as:
Activated = ON
Deactivated = OFF
Key..
AM_8200
AM8200_manu-prog-ENG