Condition With Fault Zone Events - Honeywell NOTIFIER AM-8200 Programming Manual

Condition with Fault zone events


The following display appears when the control panel is in condition of zone faults.
Fault events are also initially displayed for zone
Zone with Fault events
Text programmed
for this zone
Counter
for Faulty zones
Through arrow keys  you can scroll the list of the Zone Faults.
Through a first pressure of the enter key
name; refer to the following figure:
Detail of the Device in
Fault Condition
Text programmed
for the device
Fault Type description
Counter
of Faulty zones
Pressing the escape key
PAGE - 10
NOTIFIER ITALIA
you can display the list of devices with the indication of the point
or leaving the keypad inactive for 30 seconds. you return to the list of faulty areas
Programming Manual
Doc. M-162.1-AM8200-ENG Rev A2
AM_8200
AM8200_manu-prog-ENG