Honeywell NOTIFIER AM-8200 Programming Manual page 18


Programming – System -
This function allows the choice of system Network type as follows:
STANDALONE = Single Panel without Network connection with up to 8 lines
NET 16 = Network of Panels with up to 16 lines in total
NET 128 = Network of Panels with up to 128 lines in total

Programming – System -
The "Address" entry will assign the panel device number on the CAN-BUS network.

Programming – System – LINE
Style: OPEN LINE, CLOSED LOOP
This function allows to change (in memory) the type of line connection,
Press one of these key to select the Previous or Next line
Through a first pressure of the enter key
PAGE - 14
NOTIFIER ITALIA
System TYPE
System Address
the Line editing function is activated,
Programming Manual
Doc. M-162.1-AM8200-ENG Rev A2
AM_8200
AM8200_manu-prog-ENG