Alarm Condition
The following display appears when the control unit is in condition of zone alarm.
FIRST ZONE IN ALARM
Date and Time +
Event Number ID
Text for the Zone
If more zones are in Alarm :
2 ZONES IN ALARM
LAST ZONE IN ALARM
Date and Time +
Event Number ID
Counter for zones
in alarm
Through the arrow keys you can scroll the list of the zones containing Faults.
By pressing the enter key
through the arrow keys you can scroll the list of the devices in alarm.
Device in Alarm
D = Detector
M = Module
Text programmed
For this Device
AM_8200
AM82000_manu-prog-ENG
you can access the list of point in alarm of the zone selected on the display,
Programming Manual
Doc. M-162.1-AM8200-ENG Rev A2
PAGE - 9
NOTIFIER ITALIA