Formax FD 38Xi Operator's Manual page 15

FD 38Xi CUSTOM FOLDS SETUP, cont.
5.
Next set the automatic outfeed stackers. There are 10
stacker positions available. Select the one that best
matches the size of the folded document. Using the
touch pad key in the stacker position (Fig. 25), key in
0 - 9 based on the chart below.
Press the enter key
box under the icon will show the position entered. (Fig.
26).
Stacker Wheel Positions:
0 Folded size to: 3.75"
1 Folded size to: 4.00"
2 Folded size to: 4.43"
3 Folded size to: 4.87"
4 Folded size to: 5.30"
5 Folded size to: 5.73"
6 Folded size to: 6.16"
7 Folded size to: 6.60"
8 Folded size to: 7.03"
9 Folded size to: 7.46" and greater
4. With paper loaded in the feeder press the test icon
(Fig. 26) to check that the fold settings are correct. To
adjust the settings repeat steps 1 - 3.
When the folds and stacker wheels are set correctly
press the save icon
fold.
5.
Select the job number the fold will be saved as (Fig. 27).
Press the letter icon
the custom fold.
to enter the position. The white
to name and save the custom
to bring up the keypad to name
Fig. 25
4
Fig. 26
1.
2.
3.
Fig. 27
Letter icon
11
Invoice
1.
Test icon
Save icon
Custom Job list