Formax FD 38Xi Operator's Manual page 10

9. Select the type of fold desired by pressing the fold
selection icon
icon shows the desired fold press the "Start/Stop" icon
(Fig. 9) to begin folding.
10. Select the standard fold type needed (Fig. 10) and
press the "Enter" icon
positions.
When the fold stops are set the folder will return to the
home screen. The selected fold icon should now be
displayed.
Press the test icon
11. If the fold is skewed, remove paper, lower the infeed
tray extension and turn the skew adjustment knob left
or right to make corrections (Fig. 11).
Press the test icon
12. When satisfied with the test fold, press the "Start/Stop"
icon to begin folding. Press the same icon to
stop.
13. Press the "-" or "+" icons (Fig. 9) to adjust machine
speed to desired level.
(Fig. 9). Note: If the fold selection
to set the fold stop
to check the fold.
to check the fold.
Fold selection icon
Fig. 9
Test Button
Standard folds selection icons
1.
2.
3.
Fig. 10
Invoice
1.
Flyer
2.
Brochure
3.
Fig. 11
6
"Start/Stop" icon
Enter icon
Custom fold setup icon
Skew Adjuster