Formax FD 38Xi Operator's Manual page 13

3.
With paper loaded in the feeder press the test icon
(Fig. 17) to check that the fold settings are correct. To
adjust the settings repeat steps 1 and 2.
When the folds are set correctly press the save icon
to name and save the custom fold. Press the green box
with the check to continue or the red box with the X to
exit and return to the measurement screen.
4.
Select the job number the fold will be saved as (Fig. 18).
Press the letter icon
the custom fold.
5.
Key in the name of the job and press the save icon in the
bottom right corner (Fig. 19).
6.
Select the custom job and press the blue enter
icon to set the fold stops (Fig. 20). When the fold
stops are set, the folder will return to the Home Screen
with the custom job selected.
Press the start icon
to bring up the keypad to name
to begin folding.
Fig. 17
Custom Job list
1.
2.
3.
Fig. 18
Letter Icon
Job name Brochure
Invoice
1.
Flyer
2.
Brochure
3.
Fig. 19
Custom Job list
Brochure
1.
2.
3.
Fig. 20
9
Test icon
Save icon
Enter Icon
Save icon
Enter Icon