Ocp* Adapter With Ejector Latch Installation; Ocp* Adapter With Internal Lock Installation - Intel M50CYP1UR Series Integration And Service Manual

Intel® Server System M50CYP1UR Family System Integration and Service Guide
3.4.4

OCP* Adapter with Ejector Latch Installation

1. Ensure the latch is in the open position.
2. Push the OCP* adapter forward until the right side of the latch contacts the rear panel (see Letter A).
3. Rotate the latch towards the inside to get the OCP* adapter engaged with the connectors and close the
latch (see Letter B).
3.4.5 OCP* Adapter with Ejector Latch Removal
1. Push the latch on the left side of the OCP* adapter (see Letter A) and pull the latch out (see Letter B).
2. Using the latch, pull the adapter out of the system (see Letter C).
3.4.6

OCP* Adapter with Internal Lock Installation

All L6 and L9 integrated systems come with an internal lock on the OCP* rail. This lock is a piece of blue
plastic. The OCP* rail in the system has a dedicated space to accommodate the lock. The lock can be
mounted on the rail in two different orientations. When the keying features of the lock are facing up, it is in
an unlocked orientation. When the keying features are facing down, it is in a locked orientation. A lock
symbol is included in each side of the plastic lock to indicate its orientation. The following figure shows the
features of the lock.
Figure 44. OCP* Adapter with Ejector Latch Installation
Figure 45. OCP* Adapter with Ejector Latch Removal
47