Connecting Ethernet To The Flowmeter; Ethernet Card - Port Function Assignment And Color-Coding - ABB ProcessMaster FEP630 Manual

P R O C E S S M A S T E R F E P 6 3 0 , H YG I E N I C M A S T E R F E H 6 3 0 | C O M/ F E P 6 3 0/ F E H 6 3 0/ E / M B - E N R E V. A
4

4 Connecting Ethernet to the flowmeter

Ethernet card – Port function assignment and color-coding
The Flowmeter has two slots for the components that follow:
• Slot A : Ethernet card (part number 3KQZ400037U0100)
• Slot B : Power over Ethernet (PoE) card (part number 3KQZ400039U0100)
Port 1
Port 2
RD+
RD-
TD+
TD-
Figure 1 Ethernet card
Port/Pin
Port 1 X1
Port 1 X2
Port 1 X3
Port 1 X4
Port 2 X5
Port 2 X6
Port 2 X7
Port 2 X8
RD+
X1
X2
RD-
X3
TD+
TD- X4
X5
X6
X7
X8
Color code on the Ethernet card plug
White/orange
Orange
White/green
White/blue
White/brown
The color code is in accordance with EIA/TIA 568B.
For the functionality assigned to each pin of the Ethernet card
ports, refer to Figure 1.
The Ethernet card has two connection ports. These ports are
Green
not independent.
The internal switch allows for a daisy-chain or ring topology.
Blue
The Ethernet card supports one IP address (IPv4).
Brown
A B