Rj45 Connector (Option) - ABB ProcessMaster FEP630 Manual

P R O C E S S M A S T E R F E P 6 3 0 , H YG I E N I C M A S T E R H E P 6 3 0 | C O M/ F E P 6 3 0/ F E H 6 3 0/ E / M B - E N R E V. A
WARNING
There are limitations of the M12 plug in combination with a
hazardous-area-design flowmeter.
Ethernet cable directly connected to
Ethernet card terminals
Ethernet cable connected to M12
plug at transmitter housing
WARNING
When using the M12 Plug in combination with a hazardous-
area-design Flowmeter, a retainer clip must be put in place.
A
A
– Retaining clip
No Ex ATEX/IEX Div 2
Area Zone 2
Y Y Y
Y Y N

RJ45 connector (option)

Various Options for RJ45 connection are available from the
Modelcode. The RJ45 connector is equipped with a certain
length of Ethernet cable – as per model code.
The flowmeter is shipped with the Ethernet cable fitted to the
terminals inside the transmitter:
• Flowmeter equipped with 1 x RJ45 (with 4 wires, connecting
to Port 1)
• Flowmeter equipped with 2 x RJ45 (with 4 wires each,
connecting to Port 1 and 2)
• Flowmeter equipped with 1 x RJ45 (with 8 wires, connecting
to Port 1 and 2)
These options allow for connection to different network
topologies:
Topology 4 wires
1 x RJ45
(4 wires)
Star Y
Ring or N
daisy-chain
PoE N
For the internal wiring inside the transmitter and the related
pinout within the RJ45 connector, refer to table below:
RJ45 with 4 wires
RJ45 with 8 wires
WARNING
There are limitations of the RJ45 plug in combination with a
hazardous-area-design flowmeter.
Ethernet cable with RJ45 connector
fitted at transmitter housing
4 wires 4 wires 8 wires
2 x RJ45 (4 wires) 1 x RJ45
(8 wires)
Y
Y
N
Wiring inside the transmitter
Color Ethernet card
port/pin
Yellow Port 1 X1
Orange Port 1 X2
White Port 1 X3
Blue Port 1 X4
White/orange Port 1 X1
Orange Port 1 X2
White/green Port 1 X3
Green Port 1 X4
White/blue Port 2 X5
Blue Port 2 X6
White/brown Port 2 X7
Brown Port 2 X8
No Ex ATEX/IEX
Area Zone 2
Y Y
7
Y
N
Y
Div 2
N