Mechanical Installation (Assembly) - Honeywell ENCAL 3000 Hardware Manual

6.3

Mechanical installation (assembly)

Flow meters may be installed in the stream of waste gas as an option to provide further
control of the device.
Professional installation is the only way to ensure that the device operates safely and
without problems. Always observe the general safety rules, particularly in a potentially
explosive atmosphere. Always use a gas detector for your own protection to check your
respiratory air for toxic or explosive gases when you are working on the device in areas
where such hazards exist. Do not carry out any unauthorized modifications or technical
changes.
If the product is modified or changed without authorization, its CE
declaration will immediately become void. This may result in a safety risk!
ATTENTION
EnCal 3000 Hardware Manual
Figure 6.1: System overview
73022344 o
HARDWARE INSTALLATION
47