Intended Use Of Device; Responsibility Of The Device Or System Operator - Honeywell ENCAL 3000 Hardware Manual

1.3

Intended use of Device

1.4

Responsibility of the device or system operator

Do not expose the device to temperatures below or above temperatures
defined in the chapter "Technical spezifications"
CAUTION
If the device is transported in cold weather or extreme temperature fluctuations have
occurred, the EnCal 3000 must be returned to room temperature (temperature at the
place of use) slowly to prevent damage caused by the formation of condensation.
Do not remove transport guards and other safety devices, for example for
gas connections, before the device has been installed at its destination
CAUTION and if dirt can still ingress into it.
The device is designed and built exclusively for its intended use. This is the analysis of
natural gas or gas similar to natural gas (see details in Hardware section). Intended use
also includes compliance with all the information in this document and on the
measuring instrument. Any additional use or use other than that intended will be
deemed to be misuse. Claims of any kind due to damage as a result of misuse will be
void.
Use the device only for its intended purpose as described in this docu-
ment. If you use the device for other tasks or purposes, protection may be
adversely affected. This may result in dangerous situations.
ATTENTION
The device may only be installed and used in the potentially dangerous
zones specified on it.
The operator of the device or system is subject to legal duties relating to industrial
safety. In addition to the safety information in this document, compliance with the
safety, accident prevention and environmental protection regulations valid for the field
of application of the device is mandatory. Furthermore, the operator is responsible for
keeping the device in technically perfect condition at all times.
EnCal 3000 Hardware Manual
ABOUT THIS MANUAL AND DEVICE DELIVERY
73022344 o 11