CHAPTER
ASSEMBLY AND INSTALLATION
2
Before You Begin
Determine where you will place the stand and if the cables will exit through the bot-
tom of the stand (going through the mounting surface) or through the side of the
stand.
What You Need
•
Drill with a Ø12.5 mm drill bit
•
Measuring tape
•
Allen wrench, 3 mm and 5 mm
•
Adjustable Wrench
•
Hole saw Ø32 mm (optional)
•
Pliers (if cables exit side of stand)
•
Phillips screw driver (optional)
AutoCube 8200 User Guide
3