Dismantling; Maintenance And Repair - Honeywell ENCAL 3000 Hardware Manual

7.3.1

Dismantling

Follow the instructions below before finally removing the device to prevent dangers
through electric shock, leaking gases and explosions (in potentially explosive
atmospheres).
Return the device to the condition in which it was delivered if you wish to use the device
again at a later time or return it to the manufacturer (transport guard, blind plugs,
covers, etc.).

8 Maintenance and repair

As the operator, you are responsible for ensuring that the installation and maintenance
work described in this document is carried out correctly. Honeywell will be delighted to
help you with this work. Please contact your TAC. To ensure long-term use, in addition to
the regular calibration work described in separat manual , the device must undergo
annual maintenance/cleaning and repair work if necessary. Renewed basic calibration
may also be required if, for example, the calibration gas cylinder is replaced. We
recommend that this work is carried out by the manufacturer or personnel contracted or
trained by it to rule out the possibility of malfunctions and to adapt the software
correspondingly. .
EnCal 3000 Hardware Manual
If the device contains hazardous media, they must be removed before its
dismantling.
ATTENTION
Do not dismantle the device without first shutting down all supplies such
as pressure and electricity (including communication).
CAUTION
Ensure that the supply voltage, communication and gases cannot be
activated again by accident so that no danger will occur as a result of the
dismantling work.
ATTENTION
Prevent the release of potentially pollutant substances.
The operator is responsible for ensuring that the device remains in
technically perfect, safe condition throughout its period of operation.
ATTENTION
73022344 o
MAINTENANCE AND REPAIR
85