Possible Hardware Options And Type Plates - Honeywell ENCAL 3000 Hardware Manual

Gas Cylinders
Carrier gas
Helium / Argon
Quality 5.0
or better
Calibration gas
Quality 2.0 or
higher

11 Possible hardware options and type plates

The EnCal 3000 can be delivered with several options. These options are described in
the following segments of this appendix.
HT
SC
QS
H2
EnCal 3000 Hardware Manual
50 l gas cylinder(not always included in Honeywell package)
Option: 2 cylinders with automatic changeover system
Supply pressure 5.5 barg
Flow ± 4 ml/min per column (max. 8 ml/min with 2 columns)
Ensure that only suitable standard-compliant types are used if you do not
source them from Honeywell. Cylinder pressure greater than 1.0 MPa(g)
required. At a pressure below 2 MPa, keep a replacement cylinder available.
Other accessories required: pressure regulators and connection lines.
10 l gas cylinder (not always included in Honeywell package)
Composition preferably close to pipe line composition
(with a maximal uncertainty of 1% relative deviation for each component)
Supply pressure 1 to 4 barg nominal Pressure peak protection up to 4 barg
Flow ± 30 ml/min
Ensure that only suitable standard-compliant types are used if you do not
source them from Honeywell. Cylinder pressure greater than 1.0 MPa(g)
required. At a pressure below 2 MPa, keep a replacement cylinder available.
Other accessories required: pressure regulators and connection lines
Option Meaning Explanation
Heaters Frost protection has been added to keep the internals in the
installed housing above 0 degrees Celsius
Single
This a single channel analyser
Channel
Quad Slave This housing is the slave (2nd dome) housing of an EnCal
3000 Quad. It has no CPU board inside.
Hydrogen This analyser is configured to work with Hydrogen as carrier
gas. As such it needs venting of the carrier to safe area.
POSSIBLE HARDWARE OPTIONS AND TYPE PLATES
73022344 o 108