Safety Information And Warnings - Honeywell ENCAL 3000 Hardware Manual

2

Safety information and warnings

The safety and warning information in this manual (and on the device in English) is
designed to enable the device to be used correctly and prevent personal injury and
property damage.
The device complies with the relevant safety standards. If it is handled correctly, it does
not pose any danger which may adversely affect health or cause property damage.
To avoid risks, no changes or modifications may be made unless they have been
expressly approved by the manufacturer. Avoidable damage, for example caused by
inadequate device expertise, will render all liability claims void.
EnCal 3000 Hardware Manual
The safety and warning information must be read and obeyed in all
circumstances to ensure safe, flawless operation. We assume that users
CAUTION
will have the appropriate language skills.
Always refer to the whole safety information in this documentation and
on the device. Also refer to the other relevant sections and the technical
specifications.
Please contact your TAC if you have any questions or doubts!
ATTENTION
A lack of warning signs does not release you from your personal
responsibility for safety
It is vorbidden to operate devices, or other parts used for measuring, if
they are damaged, have a modified housing or unsuitable connections
CAUTION
since protection from explosions will no longer be guaranteed.
If you discover that the measuring equipment or other parts used for
measuring are damaged, shut down everything, disconnect everything
CAUTION from the gas and voltage supplies and secure them to prevent them being
used accidentally.
Direct contact with hot or cold surfaces can cause heat and ice burns.
Prevent this by using your personal protective equipment (for example,
CAUTION
wear gloves).
SAFETY INFORMATION AND WARNINGS
73022344 o 13