Toro Reelmaster 3100-D Operator's Manual page 5

1. Inputs
2. Reels—active
3. High temperature shutdown 7. Parking brake—Off
4. High temperature warning
117-3270
1. Warning—do not touch the hot surface.
2. Cutting/dismemberment hazard, hand; entanglement
hazard, belt—stay away from moving parts, keep all guards
and shields in place.
106-9290
5. In seat
6. PTO
8. Neutral
decal117-3270
9. Outputs
10. PTO
11. Engine—Start
12. Engine—Run
Note:
This machine complies with the industry standard
stability test in the static lateral and longitudinal tests with the
maximum recommended slope indicated on the decal. Review the
instructions for operating the machine on slopes in the Operator's
Manual as well as the conditions in which you would operate the
machine to determine whether you can operate the machine in the
conditions on that day and at that site. Changes in the terrain can
result in a change in slope operation for the machine. If possible,
keep the cutting units lowered to the ground while operating the
machine on slopes. Raising the cutting units while operating on
slopes can cause the machine to become unstable.
1. Tipping hazard—do not drive across slopes greater than
17°.
5
13. Engine—Start
14. Power
121-3598
decal106-9290
decal121-3598