3
•
Insert the Ethernet module into
the guiding grooves of slot E1
or E2 and slide it in.
•
Fasten the Ethernet module at
the top and at the bottom.
Slightly push in the module
screws using a screw driver and
turn
clockwise.
tighten the screws.
•
Alternatively, bayonet locks are
available. When using such
locks,
a
(clockwise) will do to fasten the
module.
Check for correct seat and if the connector snaps in the CPU board.
•
Push slide-lock to the left
hand side until it snaps in.
–Done !
Only
hand-
quarter-turn
Mounting the AC 800F
3-31