ABB AC 800F Mounting And Installation Instructions Manual page 208

5
Bootstrap and/or startup of the operating system
After the configuration has been done as described above using item <B>ooting or
after the waiting time has elapsed without any keyboard entries being made, the Boot
Loader attempts to start an existing operating system and to call up a system
configuration (if existing), or it waits for the bootstrap through the engineering station,
depending on the configuration.
Setting: Force execution of BootLoader:
The message
Force Remote Boot !
Fujitsu MBM29DL800T detected
DFC-BootLoader waiting ...
is displayed until an Ethernet connection to the configuration PC is established. After
this the Boot Loader records all stations to which a connection has been established
and the station from which bootstrap is done.
In the first phase of the bootstrap the domain of the flash EPROM dedicated to the
operating system is erased. While bootstrap is in progress the menu indicates as a
percentage how far data transfer has already been completed. Data is written to a
special domain of the flash EPROM and verified in several steps.
After successful data transfer the connections to all stations are broken off, and the
startup code of the operating system is executed.
Connected to station 172.16.0.4
Loading from Station 172.16.0.4
Erase OS Flash Memory... Ok
31% loaded
Programming Sector... Ok
Verify ... Ok
63% loaded
Programming Sector... Ok
Verify ... Ok
100% loaded
Programming Sector... Ok
Verify ... Ok
Programming Sector... Ok
Verify ... Ok
172.16.0.4 disconnected
OsStartAddress : E00542F0
ABB **AC 800F**
FieldController BootLoader V6.80
(C) 1999 ABB Automation Product
5-40
AC 800F Functional Description
(<- depending on flash type)
(<- this address is an example)