ABB AC 800F Mounting And Installation Instructions Manual page 43

3
If the power supply is still on:
•
Do not unplug the connector !
The connector must not be
used as an on/off switch.
•
Don't undo the screws !
First switch off power !
•
Use slot P for the power
supply module.
•
Use an appropriate tool to slide
the lock to the right hand side
until the
completely accessible and the
Lock inscription is no longer
visible.
•
Insert the power supply module
into the guiding grooves of
slot P and slide it in.
screw head is
Mounting the AC 800F
3-15