Cable Connection; Figure 20. Nvision Settings Window - Nonin WristOx2 3150 Operator's Manual

nVISION Software
8. For more information, see nVISION Help.
NOTE: Bluetooth Radio - disable at startup does not have an effect on the 3150 BLE or
3150 USB.

Cable Connection

CAUTION: All parts and accessories connected to the USB port of this device must
!
be certified according to at least IEC Standard EN 60950, IEC 62368-1, or UL 1950
for data-processing equipment.
The USB driver software for the cable needs to be installed before the device can connect to
the PC. The software is located in the USB Driver folder on the Operator's Manual CD.
1. Install the USB driver if needed. See appropriate "USB Driver Installation" section for
more information.
2. Connect the cable to the USB port on the PC.
3. Connect the cable to the device's sensor port.
4. When the device is ready to use with nVISION, these indicators display on the LCD:
• CP
• Battery indicator
5. For more information about nVISION, refer to nVISION Help.
Figure 20: nVISION Settings Window
35