Table of Contents
Advertisement
nVISION Software
Nonin's nVISION software works with Microsoft Windows ® operating systems. It allows users
to transfer recorded patient data from the device to a PC and then analyze, report, and archive
the data. The software is required to access the device's additional modes of operation and
advanced features.
nVISION Settings
The following WristOx
• Date and time – 24-hour clock format
• Display options – allows clinicians to choose the best display option for each patient:
• Full display shows %SpO
• Partial display shows pulse strength indicator, but not %SpO
• MVI (memory volume) display shows pulse strength indicator and volume (hours and
minutes) of data stored in memory. %SpO
the screen.
• Patient data storage (sample) rate – 1, 2, or 4 seconds
• Activation modes – Sensor Activation, Spot-Check Activation, or Programmed Activation
(see "Activation Modes")
• Device ID – up to 50 alphanumeric characters
• Bluetooth Radio – disable at startup (this setting has no effect on the 3150 USB or 3150 BLE
devices.)
• Synchronize device time/date to the PC time/date
• Download and save patient data to a PC
• Clear device memory
Accessing nVISION Settings
1. Connect the device to a PC using the USB interface cable.
NOTE: If using Windows 2000, the WristOx
Bluetooth connection. Windows 2000 does not function with the USB interface cable.
2. Open nVISION.
3. Click the Data Capture icon, or select New Data Capture from the File drop down menu.
4. Select 3150 from the list of oximeters.
5. Click Settings.
6. "Enter Wrist Oximeter Settings" window opens (figure 20). Update or change settings as
needed.
7. Click OK.
34
Model 3150, settings are programmed using nVISION:
2,
and pulse rate data
2
2,
2
and pulse rate readings do not display on
2
Model 3150 will only connect to a PC with a
nVISION Software
and pulse rate data
Advertisement
Table of Contents
