Verifying Operation; Startup Sequence And Self-Test - Nonin WristOx2 3150 Operator's Manual

Verifying Operation

When the WristOx Model 3150, first turns on, it performs a startup sequence and self-test. It
2,
occurs:
• When a sensor is applied to a patient (Spot Check Activation Mode).
• When a sensor is attached to the device (Sensor Activation Mode).
• At a programmed start time when a sensor is attached to the device (Programmed
Activation Mode).
• When the activation switch is pressed.

Startup Sequence and Self-Test

1. r and the software revision level:
2. All display icons:
If any indicator does not display, do not use the device. Contact Nonin
Technical Service for assistance.
NOTE: The Bluetooth indicator and activity bars will not be shown on
the 3150 USB.
3. Date/time using 24-hour clock format (MM:DD:YY:HH:MM)
(example shows 23 April 2010 at 5:57 p.m.):
Month and Day
(MM:DD)
If the time is not set, the device displays 01:01:10:00:00 (January 1st, 2010 at 12:00 a.m.).
28
Year Hour and Minutes
(YY)
Using the WristOx
(HH:MM)
Model 3150
2,