Activating The Device And Verifying Operation - Nonin GO2 LED Achieve User Manual

NOTE: Correct positioning of the device on your finger is critical for accurate measurements.
While on the finger, do not press the GO
squeeze or hold it together. The internal spring provides the correct pressure; additional
pressure may cause inaccurate readings.
11
LED Achieve against any surface and do not
2

Activating the Device and Verifying Operation

The GO LED Achieve automatically turns on when a finger is inserted. When a finger is
2
inserted, the GO LED Achieve performs a brief self test, as shown below. Verify that all
2
segments of the LED (Light Emitting Diode) display appear during the startup sequence.
12