Set Up; Handling & Transport - Dake Force 40 Instructional Manual

Additional Warnings:
• Operator must never place hands in the area of the ram during pressing operations.
• Do not use the press for pulling
• A machine not subject to maintenance and periodical structural inspection is a danger for the
operator and all persons working nearby.
• It is forbidden to tamper with, modify, or elaborate parts of the machine that alter its regular
operation.
• During the phases of maintenance requiring guards to be removed the machine must be
locked out according to local and state laws. Guards must be replaced after maintenance is
complete.
• This press is designed for one operator.
• All work requiring the piece to be pressed to be supported by the operator is forbidden.
• It is forbidden to press pieces whose dimensions or physical nature may explode or produce
splinters.

SET UP

Handling & Transport
• Total weight of the press plus packing materials is shown on the adhesive tabs places on the
packing and on the accompanying documents.
• Loading and unloading is to be done with lifting straps.
• Ensure the machines weight is not over the maximum capacity of the straps and that the
straps are in good condition.
• It is forbidden for things and/or persons to stand close to the machine, loading area, unloading
area, and means of transport during the loading and unloading operations.
• Do not make any sudden movements with the transportation device with the press lifted.
• Pay close attention during all handling processes that the press, in particular the hydraulic
power unit does not receive damage.
• Observe the in-house provisions concerning lifting and handling.
• It is forbidden to approach or pass under the press while it is lifted.
8
Dake Corporation
1809 Industrial Park Dr
Grand Haven, MI 49417
www.dakecorp.com
REV122020