Placement - Dake Force 40 Instructional Manual

Before handling the machine, it is necessary to use special lifting equipment whose maximum
•
lifting capacity is greater than the weight of the press. Press weight can be found in the
"Specifications" section of this manual.
Lifting straps must be positioned as shown below.
•
The manufacturer is no responsible for damage to the machine while loading or unloading the press.

Placement

• Simple precautions are necessary for correctly positioning the press, always consider the safety
aspect not only in relation to the work carried out with the press but also to the dangers originated
by another machine in the workplace.
• Do not position on unstable or unlevel floor.
• The press needs to have 36" of clearance on the sides and 42" of clearance in the front and back.
9
Dake Corporation
1809 Industrial Park Dr
Grand Haven, MI 49417
www.dakecorp.com
REV122020