Table of Contents
Advertisement
Getting Started: Communication between a CPU 416-2 PCI and an S7-400
7.3
Step 1: Installing the Components of WinAC Slot 41x
The WinAC Slot 41x software includes a setup program that automatically performs
the installation.
The installation program leads you step by step through the installation operation.
You can advance to the next step or return to the previous step at any time.
Proceed as follows to access the installation program.
1. Place the CD in the CD drive.
2. Select the Setup.exe file by double-clicking it.
Result: A dialog box is displayed where you can select the components you want
to install.
3. Select the components to be installed. The setup automatically selects the
components that were not found on the PC.
4. Continue with the remaining dialog boxes.
If the installation was completed successfully, a corresponding message is
displayed on the screen.
Windows Automation Center, WinAC Slot Version 4.0
Hardware Installation and Operating Manual, Edition 02/2006, A5E00273194-02
89
Advertisement
Table of Contents
