Table of Contents
Advertisement
Installation of Several WinAC Controllers (Ring Feature)
During installation, the WinAC Slot software automatically detects how many
WinAC Slot CPUs are installed. The WinAC controllers are automatically entered in
the Station Configuration Editor.
The Ring feature allows you to assign the controller panel of the CPU 41x-2 PCI:
1. In the Windows taskbar, double-click the
Station Configuration Editor.
2. Select the CPU 41x-2 PCI in the Station Configuration Editor.
3. Select the Ring ON button or select the Ring ON command from the shortcut
menu (right-click).
Result: The SF-LED on the CPU 41x-2 PCI on the back of your computer and
the FRCE-LED in the controller panel flash at 2 Hz.
4. Select the Ring OFF button to terminate the "Ring" feature.
Errors during Installation
The following errors cause the installation to abort:
•
Not enough memory space: you need at least 120 MB of free memory space
on your hard drive.
•
Defective CD: if you determine that the CD is defective, contact your Siemens
representative.
•
No Administrator rights: Log on with Administrator rights.
Windows Automation Center, WinAC Slot Version 4.0
Hardware Installation and Operating Manual, Edition 02/2006, A5E00273194-02
Installing the CPU 41x-2 PCI and the Software
symbol in order to access the
43
Advertisement
Table of Contents
