Table of Contents
Advertisement
2
3
H.1.2.1Recommendations on accessories
• For the installation of the 180 Kg Blast Chiller it is suggested the predisposition of the isolated floor to avoid extra strain
for the operator who uses the Mobile GastroNorm rack.
• For the wall installation of the 10GN it is suggested the use the Riser accessory not higher than 700 mm to improve
easiness of loading.
• In the stacking installation 6GN + 6GN it is suggested to use the adjustable feet accessory 230-290mm (code 922745)
and set them at maximum height of 290 mm to facilitate an easy loading.
• In the configuration 6GN + 6GN on Riser accessory it is suggested to load trays with a weight lower than 3 Kg on upper
level.
I
MACHINE DISPOSAL
I.1
Waste storage
At the end of the product's life-cycle, make sure it is not
dispersed in the environment. The doors must be removed
before scrapping the appliance.
SPECIAL waste materials can be stored temporarily while
awaiting treatment for disposal and/or permanent storage. In
any case, the current environmental protection laws in the
user's country must be observed.
20
5 Kg
19
18
17
10 Kg
16
15
14
13
15 Kg
12
11
10
9
10 Kg
8
7
6
5
5 Kg
4
3
2
3 Kg
1
Blast Chiller 100Kg
6
5 Kg
5
4
3
10 Kg
2
1
6
10 Kg
5
4
3
5 Kg
2
1
Blast Chiller 30Kg + Oven 6G
I.2
Before disposing of the machine, make sure to carefully check
its physical condition, and in particular any parts of the
structure that can give or break during scrapping.
The machine's parts must be disposed of in a differentiated
way, according to their different characteristics (e. g. metals,
oils, greases, plastic, rubber, etc.).
20
5 Kg
19
18
17
10 Kg
16
15
14
13
15 Kg
12
11
10
9
10 Kg
8
7
6
5
5 Kg
4
3
2
3 Kg
1
Oven 20G
3 Kg
6
5
4
5 Kg
3
2
10 Kg
1
15 Kg
10
9
10 Kg
8
7
6
5
5 Kg
4
3
2
3 Kg
1
Oven 6G + Oven 10G
Procedure regarding appliance dismantling
macro operations
<15 Kg
<10 Kg
<5 Kg
<3 Kg
<15 Kg
<10 Kg
<5 Kg
<3 Kg
61
Advertisement
Table of Contents
