Emu - Checking Plug-In Connections - MTU Detroit Diesel 12 V 2000 P62 Technical Publication

Task Description
6.18.4 EMU – Checking plug-in connections
Preconditions
• Engine is stopped and starting disabled.
Special tools
Designation / Use
Connector pliers
EMU – Checking plug-in connections
1. Use connector pliers (3) to make certain that all
EMU plug-in connections are securely seated.
2. Tighten loose bayonet union nuts (2) with
connector pliers (3) by turning them clockwise until
they lock into place.
3. Ensure that unassigned connector sockets are
protected with covering caps.
4. Contact Service if bayonet union nut is defective.
MS15009/00E 06-09
Part No.
0135315483
153
Qty.
1
© MTU