3.
You should:
•
place samples in such a way to provide proper air circulation in the chamber
•
open the door for the shortest period of time to reduce temperature fluctuations
•
secure samples from being blown out by the chamber fan e.g powdery samples
•
always check that the doors are closed
•
use only mains with earth to avoid electric shocks,
•
unplug the power cable holding the protective cover and not the cable itself,
•
disconnect the unit from the mains before undertaking any repairs or maintenance works,
•
protect the power cable and the plug from any damage
•
disconnect the power plug before moving the unit,
•
disconnect the power plug if the device will not be used for a long period of time,
•
disconnect the unit and protect it from reconnecting if it has any visual faults.
2.
PACKAGE CONTENTS
INCU-Line devices are delivered with the following equipment:
56 & 112 Prime: 2 stainless steel wire shelves with set of slides – 2 pcs. each, keys to the lock (2 pcs.),
manufacturer test certificate at 37°C. Multilingual instruction manual can be downloaded from internal
memory on USB Stick.
180 Prime: 3 stainless steel wire shelves with set of slides – 2 pcs. each, keys to the lock (2pcs.), manufac-
turer test certificate at 37°C. Multilingual instruction manual can be downloaded from internal memory on
USB Stick.
DRY-Line and VENTI-Line devices are delivered with the following equipment:
56 & 112 Prime: 2 stainless steel wire shelves with set of slides – 2 pcs. each, keys to the lock (2pcs.),
manufacturer test certificate at 105°C. Multilingual instruction manual can be downloaded from internal
memory on USB Stick.
180 Prime: 3 stainless steel wire shelves with set of slides – 2 pcs. each, keys to the lock (2pcs.), manufac-
turer test certificate at 105°C. Multilingual instruction manual can be downloaded from internal memory on
USB Stick.
Instruction Manual DL, VL, IL
Page 8 / 49