Cylinder Removal/Installation - Honda HRN216 Series Manual

CAMSHAFT/CRANKSHAFT/ PISTON/CYLINDER

3. CYLINDER REMOVAL/INSTALLATION

REMOVAL
Drain the engine oil (P. 3-6).
Remove the following:
– Crankcase cover (P. 10-2)
– Carburetor (P. 8-2)
– Muffler (P. 6-2)
– Rocker arms and push rods
(the piston and connecting rod
are shown removed for clarity)
CYLINDER HEAD
REMOVAL:
Insert a screwdriver or equivalent tool into the recesses
[1] as shown, and carefully pry to remove the cylinder
from the crankcase.
10-4
(P. 10-7)
8 x 40 mm BOLT (2)
[1]
HRN216
8 x 25 mm BOLT (2)