Honda HRN216 Series Manual page 197

VARIABLE MOWING SYSTEM/ MOWER DECK/WHEELS
4. REAR HOUSING
PARTS IDENTIFICATION
DISCHARGE GUARD
RETURN SPRING (R)
6 x 12 mm
FLANGE
BOLT (2)
REAR
HOUSING
ASSEMBLY
6 x 12 mm
FLANGE
BOLT (2)
TRANSMISSION/AXLE
SHAFT ASSEMBLY
(VKA/VLA/VYA type shown)
AXLE BRACKETS (2)
6 mm SHOULDER BOLT (4)
12-12
SERVICE BULLETIN #110
DISCHARGE
GUARD
SHAFT
DISCHARGE
GUARD
RETURN
SPRING (L)
SMART DRIVE
CABLE HOLDER
(VKA/VLA/VYA types)
SPECIAL
NUT (4)
REAR SHIELD
SHAFT
TRANSMISSION RETURN SPRING BRACKET
The spring bracket is Z-shaped and fits into a slot in the rear
housing. The bracket can fall out of the slot when no spring
tension exists. Be sure the spring bracket is properly in the rear
housing slot when reinstalling the transmission return spring.
HRN216
DISCHARGE
GUARD
REAR SHIELD
REMOVAL:
PLAIN
WASHER
SCREW
SLOT
SPRING
BRACKET
P. 12-17