Honda HRN216 Series Manual page 188

HRN216
9. Separate the shutter from the Roto-Stop cover by rotating
the shutter until the four tabs align with the cutouts in the
Roto-Stop cover.
10. Remove the Clip Director cover from the mower deck by
removing the two screws.
INSTALLATION
1. Install the Clip Director cover onto the mower deck and
tighten the two screws.
2. Align the shutter with the Roto-Stop cover until the
four tabs align with the cutouts in the Roto-Stop cover, and
then turn the shutter so that it interlocks with cover.
VARIABLE MOWING SYSTEM/ MOWER DECK/WHEELS
TAB
SLOT
(4)
(4)
SHUTTER
ROTO-STOP
COVER
SCREW (2)
SCREW (2)
REAR SHUTTER HOLDER
TAB
SLOT
(4)
(4)
SHUTTER
ROTO-STOP
COVER
SLOT
TAB
SLOT
TAB
12-3